Construction Cleanup & Closeout
Rough & Final Construction Cleaning
Rough, final and touch-up construction cleaning, including windows and glass – staged through the build so the space is ready for inspection and move-in.
Overview
Construction leaves behind more than visible debris. Fine drywall dust settles in cabinets, ductwork and light fixtures; labels and adhesive stick to glass; grout haze, paint overspray and stucco splatter land on finished surfaces. Removing it without scratching new materials takes the right sequence, tools and products.
We plan construction cleaning in stages and carry it out with specialist cleaning trade partners under our supervision. A rough clean clears the building before finishes go in, a final clean prepares it for the walkthrough and inspections, and a touch-up clean after punch-list work leaves it ready for move-in or opening.
Who it’s for
- New homes and commercial buildings approaching final inspection and turnover
- Renovations and additions where finished rooms need to be returned to everyday use
- Commercial build-outs that must be presentable for a tenant opening
- Owners or builders who need post-construction cleaning on a project they managed themselves
- Properties where finishes are sensitive, such as natural stone, specialty glass or high-gloss cabinetry
What’s included
Typically included
- Rough cleaning after drywall and before flooring, cabinets and trim: sweeping, debris removal and dust reduction
- Removal of construction debris to the project dumpster or designated area
- Final cleaning of floors, walls, baseboards, doors, cabinetry inside and out, countertops and fixtures
- Window cleaning inside and out, with label and adhesive removal using methods suited to the glass and coatings
- Removal of paint overspray, grout haze, stucco and caulk residue from finished surfaces where it can be done safely
- Vacuuming of vents, returns and registers, and coordination of HVAC filter replacement before turnover
- Cleaning of light fixtures, ceiling fans, outlets and switch plates
- Bathrooms and kitchens cleaned and polished, including appliances
- Garage, lanai and entry cleaning, including a sweep of exterior hard surfaces
- Touch-up cleaning after punch-list work and before the final walkthrough
Common exclusions
- Bulk hauling and dumpster service, which is priced as hauling and debris removal
- Mold remediation, hazardous materials or biohazard cleaning
- Duct cleaning beyond registers and returns, handled by an HVAC contractor where needed
- Carpet shampooing and stone polishing or sealing beyond routine cleaning
- Ongoing janitorial or recurring cleaning after turnover
Every proposal lists its own inclusions and exclusions in writing.
Materials, design options & upgrades
How pricing works
Construction cleaning is normally priced by the square foot of floor area cleaned, with each stage priced separately. An estimate is built from the floor plan, the number of stages, the amount of glass, the finishes involved and site conditions at the time of cleaning.
On a complete project, cleaning is priced within that project’s budget rather than as an added estimate.
What changes the cost
- Floor area and number of stories
- Number of cleaning stages
- Amount of glass, including upper-floor and exterior windows
- Finishes needing special care, such as natural stone or high-gloss surfaces
- Volume of overspray, grout haze and construction residue
- Access and whether the building is occupied
If this work is part of a larger project, it’s priced within that project’s budget — please don’t add separate estimates together. Read the pricing guide.
Typical stages
Plan the stages
We schedule rough, final and touch-up cleans around the construction sequence and inspections.
Rough clean
After drywall and before finishes, debris is removed and dust is reduced.
Final clean
Before the walkthrough, every surface, fixture and window is cleaned using methods suited to the finishes.
Punch-list touch-up
After punch-list items are completed, affected areas are cleaned again.
Turnover check
We walk the space with you before handover.
What affects the schedule
- Final cleaning needs trades finished in each area, or work will be undone
- Inspection and walkthrough dates set when cleaning must be complete
- Rain affects exterior window cleaning and pressure washing
- Punch-list work may require a further touch-up clean
Questions & answers
Why is cleaning done in more than one stage?
Dust from drywall sanding and trim work gets into everything. A rough clean before finishes go in keeps it out of cabinets and floors, so the final clean focuses on finished surfaces rather than heavy debris.
Can stickers be removed from new windows without scratching?
Usually yes, using methods suited to the glass. Some glass coatings and tempered glass can be scratched by razor blades, so cleaners follow the window manufacturer’s cleaning guidance.
Is the HVAC system cleaned too?
Registers and returns are vacuumed, and filters are replaced before turnover. Full duct cleaning, if needed, is handled by an HVAC contractor.
Start here
Planning rough & final construction cleaning?
A short form — three steps, a few minutes. Share plans or photos if you have them. We’ll review it and follow up using the contact details you provide.