Landscaping & Property Improvements

Landscape Lighting

Landscape and outdoor lighting – path lights, uplighting and accent lighting – planned for safety, appearance and efficient control.

Overview

Good outdoor lighting makes a property safer to walk at night and shows off the architecture and landscape without glare. It is a design exercise as much as an installation: deciding what to light, what to leave dark and how fixtures will look in daylight.

We plan lighting with the landscape and hardscape so wire runs, transformers and fixture locations are set before planting and paving. Most landscape lighting is low-voltage, supplied by transformers connected to the home’s electrical system; those connections and any new circuits are made by licensed electrical contractor partners.

Who does what. Electrical connections, outlets and any new circuits that supply landscape lighting transformers are installed and permitted by licensed electrical contractor partners. We design the lighting layout, coordinate the electrical work and installation with landscape and hardscape, and supervise the project.

Who it’s for

  • Owners who want walkways, steps and entries lit for safe use at night
  • Homeowners highlighting architecture, trees or palms
  • Properties with pools, patios and outdoor kitchens used in the evening
  • New landscapes where lighting can be planned in from the start
  • Commercial properties that need entry and landscape accent lighting

What’s included

Typically included

  • Lighting design: path lights, step lights, uplighting, downlighting and accent lighting
  • Fixture selection in corrosion-resistant materials suitable for Florida conditions
  • Transformer sizing and placement, with dedicated outlets or circuits by licensed electrical partners
  • Low-voltage wire runs planned to reduce voltage drop and avoid future digging
  • Controls: timers, photocells, astronomical clocks or smart-home integration
  • Fixture aiming and adjustment after dark
  • Lighting for pool areas, patios and outdoor kitchens coordinated with those trades

Common exclusions

  • Line-voltage site lighting, pole lights and parking-lot lighting, which are scoped with an electrical contractor and engineer
  • Pool lighting installed as part of the pool contractor’s scope
  • Holiday or temporary lighting
  • Smart-home systems beyond the lighting interface

Every proposal lists its own inclusions and exclusions in writing.

Materials, design options & upgrades

Brass and copper fixtures

Solid brass and copper fixtures hold up well to moisture and salt air and develop a natural patina.

Warm color temperature

Warmer light flatters landscaping and architecture; we select color temperature consistently across the property.

Zoned and dimmable control

Separate zones for security, pathways and accent lighting let you set different schedules and levels.

Uplighting palms and trees

Well-placed uplights show canopy and trunk structure; fixtures can be adjusted as trees grow.

How pricing works

Landscape lighting is priced per project, based on the lighting plan: the number and type of fixtures, transformer and control equipment, wire runs and the electrical connections needed.

Pricing on request. We haven’t published typical figures for this service yet. We price it from a defined scope — tell us about the project and we’ll explain how we’d price it.

What changes the cost

  • Number and type of fixtures
  • Fixture material and quality
  • Transformer capacity and number of zones
  • Wire run lengths and routing under existing hardscape
  • Electrical work needed to supply transformers
  • Control and smart-home integration

If this work is part of a larger project, it’s priced within that project’s budget — please don’t add separate estimates together. Read the pricing guide.

Typical stages

  1. Night review

    Where possible, we review the property after dark to see what needs light.

  2. Lighting design

    We plan fixture types, locations, zones and controls.

  3. Estimate

    We price the plan and coordinate the electrical scope.

  4. Installation

    Electrical connections are made, transformers installed and wire and fixtures placed.

  5. Aiming and handover

    Fixtures are aimed and adjusted at night, and controls are set and explained.

What affects the schedule

  • Coordination with planting and hardscape so wire is placed before beds and pavers
  • Electrical permits and inspections where required
  • Fixture availability
  • A night visit for final aiming

Questions & answers

Is low-voltage lighting safe around pools and plants?

Low-voltage systems reduce shock risk but still need correctly installed transformers, ground-fault protection where required and proper clearances from pools, which are set by electrical code.

Can lighting be added to an existing landscape?

Yes. Wire can often be routed through beds with minimal disturbance, and under walkways using boring methods where needed.

How do I keep lighting from creating glare?

Shielded fixtures, careful aiming, appropriate brightness and avoiding lights pointed at windows or neighbors all reduce glare.

Representative photo, not our project · Florian Schmidinger / Unsplash

Start here

Planning landscape lighting?

A short form — three steps, a few minutes. Share plans or photos if you have them. We’ll review it and follow up using the contact details you provide.