Roofing & Building Exterior
Stucco & Siding
Stucco over block or frame, fiber-cement and other siding, and stucco repair – built with the barriers, beads and joints that manage water.
Overview
Exterior cladding is the building’s first defense against rain and the face it shows the street. Stucco is the most common finish on Florida block homes, while fiber-cement siding and panels are popular on frame construction and for more varied architectural looks.
Each system manages water differently. Stucco applied directly to block relies on the masonry and a proper finish; stucco over framing needs a weather-resistive barrier, lath and weep screed so water that gets behind it can drain out. Siding depends on housewrap, flashing and correct lapping. We plan and supervise this work with specialist trade partners and check the hidden layers before they are covered.
Who it’s for
- New homes and additions finishing block or framed exterior walls
- Owners updating the look of a home with new siding or textured finishes
- Homes with cracked, delaminating or damaged stucco needing repair
- Additions where new stucco must match the texture and color of existing walls
- Commercial buildings needing exterior cladding renewal
What’s included
Typically included
- Wall preparation, including cleaning and repair of the substrate
- Weather-resistive barrier and flashing over framed walls
- Metal lath, casing beads, corner beads, control joints and weep screed where required
- Scratch, brown and finish coats of stucco, with textures matched to the design or existing walls
- Fiber-cement lap siding, panels and trim with correct fastening and clearances
- Window and door perimeter detailing coordinated with the opening installer
- Lath inspection coordination where the jurisdiction requires it
- Stucco crack repair and patching with texture blending
Common exclusions
- Painting, unless included in the exterior scope
- Repair of water-damaged framing or sheathing discovered behind cladding, handled as water intrusion repair
- Structural repairs to block walls
- Removal of materials containing asbestos, if found in older finishes
Every proposal lists its own inclusions and exclusions in writing.
Materials, design options & upgrades
How pricing works
Stucco and siding are normally priced by the square foot of wall area, measured from the elevations or on site. An estimate is built from wall area, the system specified, trim and accessory quantities, wall heights and existing conditions.
Repairs are priced by the extent of the damaged area and the effort to blend texture, which can be more than the patch itself. If damage behind the cladding is suspected, an assessment comes before a firm price.
What changes the cost
- Wall area and height, and the scaffolding needed
- System – stucco over block, stucco over frame, or siding
- Trim, accent bands and architectural details
- Removal of existing cladding
- Texture matching for repairs and additions
- Number of openings to detail
If this work is part of a larger project, it’s priced within that project’s budget — please don’t add separate estimates together. Read the pricing guide.
Typical stages
Inspect and plan
We review walls, openings and existing conditions and confirm the system and finishes.
Prepare substrate
Walls are cleaned and repaired, and barriers and flashings are installed on framed walls.
Lath and accessories
Lath, beads, joints and weep screed are installed and inspected where required.
Apply cladding
Stucco coats are applied with proper curing, or siding and trim are installed.
Review and touch-up
We check joints, lines and texture, and the surface is ready for paint.
What affects the schedule
- Rain and high heat affect stucco application and curing
- Windows and doors must be installed and flashed first
- New stucco needs to cure before painting; the paint manufacturer’s guidance sets how long
- Lath inspections, where required, must pass before stucco is applied
Questions & answers
Are stucco cracks a problem?
Fine hairline cracks are common in cement stucco and often cosmetic. Wider cracks, cracks with staining, or stucco that sounds hollow can point to water or structural issues and should be examined.
Can new stucco match my existing walls?
Texture can usually be matched closely by an experienced finisher. Painting the entire elevation afterward gives the most even final appearance.
Is fiber-cement siding suitable for Florida?
It is widely used. It resists rot, termites and fire, and can be installed to meet wind requirements when fastened to the manufacturer’s specification.
Start here
Planning stucco & siding?
A short form — three steps, a few minutes. Share plans or photos if you have them. We’ll review it and follow up using the contact details you provide.